IEEE1394A FireWire/Hi-Speed USB2.02.5” Hard Drive Data Encrypt EnclosurePHR-250CEUser’s Manual
4. (a) Seat the Circuit Board and hard drive to the Bottom Tray. (b) Secure the hard drive with Screws (5mm in diameter) on the bottom of the tray.5.
7. Secure the Back Panel with 2 screws (3mm in diameter) from each side.8. Plug in the secure key, connect the Enclosure directly to the computer by u
Secure KeyMacally Firewire/USB2.0 Data Encrypt enclosure comes with two identicalsecure keys, which are powered by NIST and CSE certified DES 40-biten
Software InstallationSoftware Installation for MacMacOS Software InstallationFireWire Connection for MacOSMacOS will recognize the enclosure automatic
Software Installation for PCIEEE1394 FireWire Connection for Windows98SE/ME/2000/XPPlug the IEEE 1394 cable into any available port, Windows(98,ME,200
Select on the “Specify a location” option and type in “x:\PHR-250CE\DRI-VERS” where “x” is the letter of the CD-ROM drive with the Drivers CDinserted.
After the installation, you will get USB2.0 Hi-Speed for file transfer, if PHR-250CE is connected to USB2.0 host adapter; if connected to USB1.1 port
1. Please run FDISK utility.2. Follow the screens below to complete the Hard Disk Partition.Step 1Step 217
Step 3Step 4Step 518
Step 6Step 7Step 83. After restart the computer, please verify the new drive in "My Computer".4. Please do a full format to the hard drive
© Copyright 2005This manual is furnished under license and may be used or copied only in accordance with theterms of such license.Except as permitted
For Windows2000/XPIf you can see a new entry under Disk drives of Device Manager, you areready to partition and format the drive.1. Open Control pane
Step 44. Write a signature to the new drive, click “Next”.Step 55. Click “Finish” to close the wizard.21
Step 77. Partition and fully format the drive and follow the onscreen prompts.**note: If it assigns a new hard drive letter but format dose not run au
CONTENTSIMPORTANT: PLEASE READ BEFORE USING ENCRYPT KEYS! 4INTRODUCING FIREWIRE/USB2.0 HI-SPEED DATA ENCRYPT ENCLOSURE 5About this Guide 5System Requ
IMPORTANT: Please Read Before Using Encrypt Keys! Please read it thoroughly before using PHR-250CE encrypt enclosures, andsave this note for future re
Introducing IEEE1394A FireWire/Hi-Speed USB2.0 2.5" Hard Drive Data Encrypt Enclosure-PHR-250CEThank you for using the PHR-250CE-Portable IEEE139
Package ContentsThe PHR-250CE-Portable IEEE1394A FireWire/Hi-Speed USB2.0 2.5" HardDrive Enclosure package includes the following software and do
ON TRANSPORTATIONSave the packing materials as you may need to repack and transport theunit at a later date.Always remove the disc before moving the u
Hardware BasicPrecaution:1) Please connect the enclosure directly to your computer.2) Please make sure your hand is dry and remove static from you
Hardware Installation1. Remove the Back Panel from the Enclosure.2. Use both thumb to push the Bottom Tray out.3. Align the pins on the hard drive to
Comments to this Manuals